Endolaser Optical Fibers (400µm / 600µm)
High-precision, medical-grade quartz optical fibers designed specifically for Endolaser / Endolift subcutaneous tissue remodelling, lipolysis, and facial/body skin tightening treatments.
 
Engineered for maximum energy transmission, durability, and safety, each fiber is individually double-sterilised for immediate clinical use.
 
 
Key Features & Technical Specifications
Fiber Core Material: Ultra-pure Quartz glass core ensuring high power transmission and minimal thermal dissipation along the length.
 
Universal Connector: Standard SMA-905 International Connector, offering plug-and-play compatibility with most standard 980nm, 1470nm, and dual-wavelength diode aesthetic lasers.
 
Total Length: 3 Meters (provides ample mobility and range during clinical procedures).
 
Sterilisation & Packaging: Individually sealed in double-layer ethylene oxide (EO) sterile packaging. Features built-in sterilisation indicator marks and expiration coding.
 
Flexibility & Safety: High mechanical resistance to bending (recommended bend radius > 15 cm) to prevent fiber breakage mid-procedure.
 
 
 
Which Fiber Size Do You Need?
400µm Fiber (Facial & Delicate Areas)
 
Best For: Submental (double chin), jawline contouring, neck, periorbital (around eyes), and lower face lifting.
 
Why Choose 400µm: Designed with a finer diameter to navigate delicate facial anatomy with high precision, allowing tight vector mapping and controlled thermal energy delivery in smaller tissue zones.
 
600µm Fiber (Body & Larger Surface Areas)
Best For: Abdomen, flanks (love handles), arms, thighs, and larger body contouring areas.
 
Why Choose 600µm: Built with a slightly wider core diameter to deliver energy efficiently across larger, fibrous fat deposits, accelerating lipolysis and deep dermal contraction on the body.
 
Amount: 1 fiber per pack.
 
 
 
Practitioner Preparation & Stripping Protocol
To prepare fresh fiber tips safely during treatment steps:
Outer Sheath: Strip the outermost protective buffer layer back using standard manual tension.
 
Inner Cladding: Utilise our Endolaser Fiber stripping tool to strip the second coating layer cleanly.
 
Tip Cutting: Cut the quartz fiber cleanly using dedicated scissors for optimal beam delivery.
 
 
Single-Use vs. Reuse Flexibility:
Single-Use Standard: Using a fresh fiber for each client is recommended for maximum clinical efficiency, absolute sterility, and optimal energy delivery.
 
Reuse & Disinfection Protocol: Built from high-durability quartz glass, the fiber can also be trimmed/stripped back past the used portion and reused across treatments. After each procedure, cut off the used tip, then sterilise by a high-temperature autoclave (121degrees for 12–15 minutes), or by Ethylene Oxide (EO) gas disinfection before the next clinical use.
 
 
 
Safety & Operational Guidelines
Connection Integrity: Ensure the SMA-905 connector is screwed in firmly before firing. Do not touch or allow dust to collect on the optical face.
 
Aiming Beam Check: Verify that the red aiming beam creates a clean, concentrated dot at the tip before sub-dermal insertion. If the aiming beam appears faint or diffuse, restrip the fiber and cut the tip or replace the fiber.